manualshive.com logo in svg

Edirol PCR-M30, Owner'S Manual

Share
Download
Edirol PCR-M30 Owner'S Manual Download Page 87

 

87

 

Use MIDI functionality

 

■

 

Transmit mode

 

fig.edt

 

1

 

Press the 

 

[EDIT]

 

 button.

The display will indicate “EDT.”

 

2

 

Press the 

 

[BULK]

 

 key.

 

3

 

Press the 

 

[1]

 

 key.

 

fig.blt

 

The display will blink “BLT” (Bulk Transmit).

 

4

 

Confirm what’s indicated and press the 

 

[ENTER]

 

 button.

 

fig.ts

 

The display will indicate “TS,” and the “S” will blink.

 

5

 

Use the 

 

[DEC]

 

 

 

[INC]

 

 buttons or the 

 

[0]

 

 

 

[1]

 

 keys to select the mode.

 

6

 

Confirm what’s indicated and press the 

 

[ENTER]

 

 button.

 

fig.bs-1

 

7

 

The third digit of the display will blink, and the PCR-M30/50/80 will wait 
to transmit bulk data.

 

8

 

Press the 

 

[ENTER]

 

 button.

On your sequencer software, specify “PCR 2” as the MIDI input device. For details on this 
setting, refer to the manual of your sequencer software.
For details on the port that will be used to transfer bulk data, refer to 

 

“Input / output devices”

 

 

(p. 43).

 

fig.end

 

9

 

When the PCR finishes receiving the bulk data, the display will indicate 
“END.”

 

10

 

Confirm what’s indicated and press the 

 

[ENTER]

 

 button.

 

0

SINGLE BULK

 

The currently recalled memory (the current memory) will 
be transmitted as bulk data

 

1

ALL BULK

 

All memories (memories 1-F) will be transmitted as bulk 
data.

PCR-M30/50/80.book 87 ページ ２００５年１１月１０日　木曜日　午後２時４９分

Summary of Contents for PCR-M30





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands