Edirol PCR-M30, Owner'S Manual

Page: 41 / 124

41
Basic connections and MIDI flow
* If you want to use Media Player to play a sound module connected to the PCR’s MIDI OUT connector,
make driver settings as described in “Settings and checking~Specifying the MIDI input/
output destination~” (p. 26).
fig.connect-MIDI-IF
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
* Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
Turn MIDI I/F MODE ON as described in “MIDI I/F MODE” (p. 94).
fig.flow-USB-b
* For an explanation of the items in the diagram, refer to “Input / output devices” (p. 43).
USB connections with your computer
- Using the PCR-M30/50/80 as a MIDI interface -
MIDI flow
BULK RECEPTION BULK data is received here
PORT 1
Of the keyboard, bender lever, and other controllers, those that have been set to
PORT 1 will transmit data from here
PORT 2
Of the keyboard, bender lever, and other controllers, those that have been set to
PORT 2 will transmit data from here
BULK TRANSMISSION BULK data is transmitted from here
MIDI OUT MIDI sound module (sold separately) MIDI IN
MIDI
IN
MIDI
IN
USB cable
AC adaptor
It is not necessary to connect the AC
adaptor if you are using a USB connection.
However, with some computers, the PCR-
M30/50/80 may not operate when powered
from the USB bus. In this case, set the
power switch to the DC position and
connect the AC adaptor.
Roland
DP series
(sold separately)
EV-5
(sold separately)
MIDI
OUT MIDI
OUT
PCR-M1 PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
MIDI OUT
MIDI IN
MIDI I/F MODE ON
PORT 1
PORT 2 /
MIDI OUT DEVICE
MIDI IN DEVICE
BULK RECEPTION
BULK TRANSMISSION
PCR-M30/50/80.book 41 ページ ２００５年１１月１０日 木曜日 午後２時４９分