Edirol PCR-M30, Owner'S Manual

Page: 37 / 124

37
Getting Connected and Installing Drivers (Macintosh)
6
From the File menu, choose Open .
7
Select PCR from the FreeMIDI Setting folder you copied in step 3 , and click
[Open] .
8
Verify that MIDI transmission and reception occur correctly.
From the MIDI menu, choose Check Connections .
fig.FreeMIDI
9
Try playing the keyboard of the PCR.
If the number
2 or 3 in the diagram at
right changes to a shape, the
settings have been made correctly.
If a MIDI sound module is connected
to the PCR’s MIDI OUT connector,
click the PCR MIDI IN, OUT icon
shown in the diagram at the right. If
you hear sound, the settings have
been made correctly.
10
Once again choose the MIDI menu command Check Connections to end
the test.
11
From the File menu, choose Quit to exit FreeMIDI Setup .
If you are unable to select
Open , make settings as
follows.
1. From the File menu,
choose FreeMIDI
Preference .
2. Uncheck “Use OMS
when available.”
3. Close FreeMIDI.
Return to step 4 and
continue the procedure.
For details on the PCR’s
input/output devices,
refer to
“Input / output
devices” (p. 43).
This completes installation of the driver.
Next, make MIDI device settings in your sequencer or other software.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PCR’s input/output devices, refer to
“Input / output devices” (p. 43).
PCR-M30/50/80.book 37 ページ ２００５年１１月１０日 木曜日 午後２時４９分