Edirol PCR-M30, Owner'S Manual

Page: 61 / 124

61
Use MIDI functionality
■
Advanced mode 1-3
Advanced mode 1 of AFTERTOUCH ASSIGN lets you specify the upper and lower limits of
the aftertouch value in addition to the items of Basic mode. Advanced modes 2 and 3 let you
specify an aftertouch message for an individual note (Polyphonic Key Pressure) instead of
specifying the channel.
1.
Press the [EDIT] button.
2.
Slightly move the controller to which you want to assign an Aftertouch message. In the
case of a button, press that button.
The display will indicate the number of the selected controller.
3.
Verify that the display indicates the correct controller, and press the [ENTER] button.
fig.at1
4.
Press the [AFTERTOUCH] key and then press a key [1] - [3] .
The display will indicate the selected mode.
5.
Press the [ENTER] button.
6.
Input the channel.
7.
Press the [ENTER] button.
8.
If you are using Advanced modes 2 or 3 , input the note number.
9.
If you are using Advanced modes 2 or 3 , Press the [ENTER] button.
10.
If you are using Advanced modes 1 or 3 , specify the upper limit and lower limit of the
value as described in “Specifying the range of values (upper and lower limits)” (p. 62).
11.
If you are using Advanced modes 1 or 3 , specify the output port.
(
➔
“Specifying the port” (p. 59))
12.
If you are making an assignment for a button, specify the button mode.
(
➔
“Specifying the button mode” (p. 59))
PCR-M30/50/80.book 61 ページ ２００５年１１月１０日 木曜日 午後２時４９分