Edimax BR-6228nS V3, User Manual

Page: 40 / 160

36
II-6. WPS Setup
If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use this
method to connect to the BR-6428nS V3/BR-6228nS V3’s Wi-Fi network.
1.
Press the WPS button on the BR-6428nS
V3/BR-6228nS V3 for 2 – 5 seconds to activate
WPS. The WLAN LED will flash to indicate that
WPS is active.
2.
Within two minutes , press the WPS button on
the wireless device/client to activate its WPS.
3.
The devices will establish a connection. Repeat
for additional wireless devices.
Please check the instructions for your wireless device for how long
you need to hold down its WPS button to activate WPS.
II-7. Reset to Factory Default Settings
If you experience problems with your BR-6428nS V3/BR-6228nS V3, you can
reset the device back to its factory settings. This resets
all settings back to
default.
1.
Press and hold the WPS/Reset button found on the back panel for at least
10 seconds, until the power LED begins to flash.
2.
Release the button when the power LED is flashing.
3.
Wait for the BR-6428nS V3/BR-6228nS V3 to restart. The BR-6428nS
V3/BR-6228nS V3 is ready for setup when the power LED displays
on.