Edimax BR-6228nS V3, User Manual

Page: 151 / 160

147
Router Login Enter this URL in a web browser to run iQ Setup or
configure advanced settings. You must be
connected to the device
by Wi-Fi or Ethernet
cable.
Username/Password This is the default username and password to
access the browser based configuration interface
when you go to the “Router Login” URL (above).
Wi-Fi Network
Name This is the default Wi-Fi network name for the
device. Search for this name (SSID) and connect to
it in order to access the “Router Login” URL
(above).
MAC A MAC address is unique to every device and is
used for identification within a network. Your
device’s unique MAC address is displayed here.
PIN CODE This is your device’s PIN code for Wi-Fi Protected
Setup (WPS).
5. I forgot my password.
a. Reset the router to its factory default settings and use the default username
admin and default password 1234 . Default settings are displayed on the product
label on the back of the device, as shown above.
6. My BR-6428nS V3/BR-6228nS V3 has a weak wireless signal in
range extender mode.
a. Weak signals are usually caused by interference from other devices or obstacles
blocking the BR-6428nS V3/BR-6228nS V3’s wireless signal:
b. Keep the device away from other radio devices such as microwaves or wireless
telephones.
c. Do not put the device in the corner of a room or under/nearby metal.
d. Ensure there are as few obstacles as possible between the BR-6428nS
V3/BR-6228nS V3 and your wireless network device.
In range extender mode , the BR-6428nS V3/BR-6228nS V3’S weak wireless signal
may be in turn caused by a weak signal from your existing router. It’s important to
choose a good location for the BR-6428nS V3/BR-6228nS V3
in relation to your
existing wireless router . The best location is roughly in the middle between your
existing wireless router and the area you would like to be covered by the
BR-6428nS V3/BR-6228nS V3. If you are too far away from your existing router,
then it is difficult for the BR-6428nS V3/BR-6228nS V3 to receive a wireless signal.