Edimax BR-6228nS V3, User Manual

Page: 108 / 160

104
IV. Appendix
IV-1. Configuring your IP address
For first time access to the URL http://Edimax.Setup please ensure your
computer is set to use a dynamic IP address. This means your computer can
obtain an IP address automatically from a DHCP server. You can check if your
computer is set to use a dynamic IP address by following
IV-1-1. How to check
that your computer uses a dynamic IP address .
Static IP users can also temporarily modify your computer’s IP address to be
in the same IP address subnet e.g. 192.168.2.x (x = 3 – 254) as the BR-6428nS
V3/BR-6228nS V3 in order to access http://Edimax.Setup .
The BR-6428nS V3/BR-6228nS V3’s default IP address is
192.168.2.1.
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system in
IV-1-2. How to modify the IP address of your computer .
Static IP users please make a note of your static IP before you
change it.
You can assign a new IP address to the device which is within the subnet of
your network during setup or using the browser based configuration interface
(refer to
III-3-4. LAN ). Then you can access the URL http://Edimax.Setup in
future without modifying your IP address.
Please remember to change your IP address back to its original
value after the device is properly configured.