EdilKamin Italiana Camini IDROPOINT, Installation, Use And Maintenance Manual

Page: 203 / 309

- 203
-
ENGLISH
ELECTRONIC APPARATUS
SERIAL PORT
The stove has a serial port RS232, to which an optional on-off control device, such as an environment thermostat, can be installed
by the TAC using a special wire (code 640560).
The serial socket is inside the stove, on the left side.
BACKUP BATTERY
The motherboard has a backup battery (type CR 2032, 3 volts).
Failure of the battery is due to normal wear and tear (and is not a manufacturing defect).
For more information, contact the TAC which carried out the first ignition.
SAFETY DEVICES
• THERMOCOUPLE:
Positioned on the smoke discharge, it measures the temperature.
According to the set parameters, it controls ignition, operation and switching off.
• DIFFERENTIAL PRESSURE SWITCH:
Positioned in the smoke-aspiration area, it is triggered in the case of a depression in the circuit (e.g. obstructed flue).
• SAFETY THERMOSTAT:
This intervenes if the temperature inside the stove is too high.
It blocks pellet loading causing the stove to go out.
• WATER SAFETY THERMOSTAT:
This intervenes if the temperature of the water inside the stove is too high.
It blocks pellet loading causing the stove to go out.
Manually reset using the button on the back of the stove (see page 202).
MOTHERBOARD
ALIMENT
AZIONE
230V
AC
SCHEMA CONNESSIONI
POTENZA STUFE(N100)
3.0
MICHELE R.
23.03.2012
N
+5V
F
ALIMENT
AZIONE
230V
AC
DISPLA
Y
CANDELETT
A
N
COCLEA
DEP
DEP= DEPRESSIMETRO YAMANTAKE
TSP=TERMOSTATO SICUREZZA VANO PELLET
TSP
ENCODER FUMI
ENCODER FUMI
m
SCAMBIA
TORE
m
FUMI
m
SERIAL/
TERMOST
AT
O EXT
.
TERM EXT
. OPT
.
ENCODER
FUMI
GND ENC
sonda
fumi
+
sonda
ambiente
NTC
-
sonda acqua
PE
SMOKE ENCODER
DISPLAY
SERIAL/EXTERNAL THERMOSTAT
EXT. THERMOSTAT OPT
230 V AC SUPPLY