134-0009-CP
Universal
Small Sprayer w/ Elbow
Hand Held Pull-Out Sprayer
Chrome
(1) Check desired position to make sure there is enough room for your hose to gather under the
deck without getting caught on anything. Drill 1” hole in the deck in the desired location.
(2) Remove holder from hose/sprayer assembly. Unscrew 1/2” adapter from hose and pull hose
out through the top side of the holder. Remove lock nut from mounting tube.
(3) Slip holder through the hole in the deck. Make sure escutcheon properly lines up with the
mounting tube. From the under the deck, thread the lock nut onto the mounting tube and
tighten.
(4) Slide hose/sprayer assembly back through holder from above the deck and replace the 1/2”
adapter.
(5) Connect to desired 1/2” NPT-Male water source or valve. Make sure rubber washer is in
place in the larger female side of the adapter.
(6) This sprayer has two functions: intermittent and continuous. For intermittent spray, simply
press down on the trigger. For continuous spray, lift up on the trigger until it locks. To
release, simply press the trigger back down. If you wish the remove the hook from the
sprayer, unscrew the face. Slide the hook ring off the sprayer and remove the large, black,
flat washer from inside the face. Replace the face.
1
2
3
4
6
5
I
NSTALLATION
I
NSTRUCTIONS
OEM Version
Attention Manufacturers:
Please include this Installation
Instruction sheet with your Owner’s
Documentation.
Summary of Contents for 268 Center Console
