6-4
Selection Guide
Helm Options
Four helms are offered in 3 displacements, as noted in the chart at right.
The H-21 helm has a 1" straight wheel shaft; H-25 has a 3/4" tapered
shaft. The H-42 and H-41 helms both have a 1" straight wheel shaft.
Tubing/Hose Options
Use soft refrigeration type copper tubing for optimum performance. For
tube-to-cylinder flex hoses, select a hydraulic hose rated for 1000 PSI (70
bar) working pressure, and with a very low volumetric expansion rating.
Cylinder Options
Cylinders are made from brass & stainless steel. Available with stainless rod
& ball joint (TMB models) or stainless rod & bronze clevis (TMC models.)
Cylinders with ball joints have 2-axis articulation.
The K-31 is an optional pivot mount cylinder which can be used in the systems
numbered "8a" and "8b" on the opposite page. With this cylinder, the number
of wheel turns becomes 6.4 (using the H-42 helm) or 4.6 (H-41 helm).
The application guide on page 6-3 should be used with discretion. The
chart is only a guide to selecting a steering system. A steering system
manufacturer cannot anticipate all the variables in boat-rudder design
that affect the steering loads. It is the final responsibility of the boat
builder/designer to specify maximum expected steering loads. If the
required information is not available, please see the Displacement and
Planning Hull data sheets on page 10-21 and page 10-22. These
sheets after being completely filled out can be faxed to Teleflex
Technical Support at 604-279-2202.
NOTICE
HELM PART#
DISPLACEMENT RANGE
RELIEF VALVE SETTING
H-21
2.75 cu.in.
950 psi (66Bar)
H-25
2.75 cu.in.
950 psi (66Bar)
H-42
4.00 cu.in.
950 psi (66Bar)
H-41
5.50 cu.in.
950 psi (66Bar)
DISTANCE—CYLINDER TO FURTHEST HELM
HELM TYPE
40 FEET OR LESS
MORE THAN 40 FEET
All
1/2" O.D. Copper Tubing
5/8" O.D. Copper Tubing
MODEL
PART#
DESCRIPTION / MODEL / ROD END CONFIG
7" Stroke:
HC5350
Cylinder BA175-7TMB (Rod End Ball Joint)
HC5356
Cylinder BA175-7TMC (Rod End Clevis)
HC5351
Cylinder BA200-7TMB (Rod End Ball Joint)
HC5357
Cylinder BA200-7TMC (Rod End Clevis)
9.5" Stroke:
K-8
Hynautic Cylinder, 2.5" (Rod End Ball Joint)
11" Stroke:
HC5378
Cylinder BA200-11TMB (Rod End Ball Joint)
HC5379
Cylinder BA200-11TMC (Rod End Ball Clevis)
3-LINE INBOARD STEERING
Summary of Contents for 245CC
