2-6
6205s BATHYMETRIC AND SIDE SCAN SONAR
0020300_REV_E
2.1.1
Mounting Plate
The 6205s Mounting Plate is made of stainless steel and was designed with a variable bolt pattern to
secure the system to several different deployment mechanisms, thereby cutting back on installation and
mobilization time. The variable bolt pattern is shown in
EdgeTech advises mounting the 6205s Sonar Head to the bow of a survey vessel. By placing the system at
the bow, the sonar should be far enough away from most interference, such as hull echoes, propeller
noise, and wake.
Figure 2-2: The Mounting Plate
Refer to
for a comparison of bolt patterns.
Figure 2-3: The Optional Adaptor Flange Installed onto the Mounting Plate
Summary of Contents for 6205S
