Edge-Core ECS4810-12M Layer 2, Management Manual

Page: 804 / 1236

C
HAPTER
27
| Access Control Lists
IPv6 ACLs
– 804 –
This allows any packets sent to the destination 2009:DB9:2229::79/48
when the next header is 43.”
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/48 next-header 43
Console(config-ext-ipv6-acl)#
R
ELATED
C
OMMANDS
access-list ipv6 (800)
Time Range (648)
show ipv6 access-
list
This command displays the rules for configured IPv6 ACLs.
S
YNTAX
show ipv6 access-list { standard | extended } [ acl-name ]
standard – Specifies a standard IPv6 ACL.
extended – Specifies an extended IPv6 ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show ipv6 access-list standard
IPv6 standard access-list david:
permit host 2009:DB9:2229::79
permit 2009:DB9:2229:5::/64
Console#
R
ELATED
C
OMMANDS
permit, deny (Standard IPv6 ACL) (801)
permit, deny (Extended IPv6 ACL) (802)
ipv6 access-group (804)
ipv6 access-group
This command binds a port to an IPv6 ACL. Use the no form to remove the
port.
S
YNTAX
ipv6 access-group acl-name { in | out }
[ time-range time-range-name ]
no ipv6 access-group acl-name { in | out }
acl-name – Name of the ACL. (Maximum length: 16 characters)
in – Indicates that this list applies to ingress packets.
out – Indicates that this list applies to egress packets.