manualshive.com logo in svg

Edge-Core ECS4810-12M Layer 2, Management Manual, Page: 563 / 1236

Share
Download
Edge-Core ECS4810-12M Layer 2 Management Manual Download Page 563

C

HAPTER

 18

  |  Multicast Filtering

Multicast VLAN Registration

–  563  –

W

EB

 I

NTERFACE

To configure interface settings for MVR:

1.

Click Multicast, MVR.

2.

Select Configure Interface from the Step list.

3.

Select Configure Port or Configure Trunk from the Action list.

4.

Select an MVR domain.

5.

Set each port that will participate in the MVR protocol as a source port 
or receiver port, and optionally enable Immediate Leave on any 

receiver port to which only one subscriber is attached.

6.

Click Apply.

Figure 344:  Configuring Interface Settings for MVR   

A

SSIGNING

 S

TATIC

M

ULTICAST

 G

ROUPS

TO

 I

NTERFACES

Use the Multicast > MVR (Configure Static Group Member) page to 

statically bind multicast groups to a port which will receive long-term 

multicast streams associated with a stable set of hosts.

CLI R

EFERENCES

◆

"mvr vlan group" on page 1046

C

OMMAND

 U

SAGE

 

◆

Multicast groups can be statically assigned to a receiver port using this 

configuration page. 

◆

The IP address range from 224.0.0.0 to 239.255.255.255 is used for 

multicast streams. MVR group addresses cannot fall within the reserved 

IP multicast address range of 224.0.0.x. 

◆

Only IGMP version 2 or 3 hosts can issue multicast join or leave 

messages. If MVR must be configured for an IGMP version 1 host, the 

multicast groups must be statically assigned.

Summary of Contents for ECS4810-12M Layer 2





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments