Edge-Core ECS4810-12M Layer 2, Management Manual

Page: 119 / 1236

C
HAPTER
4
| Basic Management Tasks
Setting the System Clock
– 119 –
S
ETTING THE
SNTP
P
OLLING
I
NTERVAL
Use the System > Time (Configure General - SNTP) page to set the polling
interval at which the switch will query the specified time servers.
CLI R
EFERENCES
◆
"Time" on page 643
P
ARAMETERS
The following parameters are displayed:
◆
Current Time – Shows the current time set on the switch.
◆
SNTP Polling Interval – Sets the interval between sending requests
for a time update from a time server. (Range: 16-16384 seconds;
Default: 16 seconds)
W
EB
I
NTERFACE
To set the polling interval for SNTP:
1.
Click System, then Time.
2.
Select Configure General from the Step list.
3.
Select SNTP from the Maintain Type list.
4.
Modify the polling interval if required.
5.
Click Apply
Figure 13: Setting the Polling Interval for SNTP