Edge-Core ECS4810-12M Layer 2, Management Manual

Page: 769 / 1236

C
HAPTER
26
| General Security Measures
DHCP Snooping
– 769 –
show web-auth
summary
This command displays a summary of web authentication port parameters
and statistics.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show web-auth summary
Global Web-Auth Parameters
System Auth Control : Enabled
Port Status Authenticated Host Count
---- ------ ------------------------
1/ 1 Disabled 0
1/ 2 Enabled 8
1/ 3 Disabled 0
1/ 4 Disabled 0
1/ 5 Disabled 0
.
.
.
DHCP S
NOOPING
DHCP snooping allows a switch to protect a network from rogue DHCP
servers or other devices which send port-related information to a DHCP
server. This information can be useful in tracking an IP address back to a
physical port. This section describes commands used to configure DHCP
snooping.
Table 87: DHCP Snooping Commands
Command Function Mode
ip dhcp snooping Enables DHCP snooping globally GC
ip dhcp snooping
information option
Enables or disables the use of DHCP Option 82
information, and specifies frame format for the
remote-id
GC
ip dhcp snooping
information policy
Sets the information option policy for DHCP client
packets that include Option 82 information
GC
ip dhcp snooping verify
mac-address
Verifies the client’s hardware address stored in the
DHCP packet against the source MAC address in the
Ethernet header
GC
ip dhcp snooping vlan Enables DHCP snooping on the specified VLAN GC
ip dhcp snooping trust Configures the specified interface as trusted IC
clear ip dhcp snooping
database flash
Removes all dynamically learned snooping entries
from flash memory.
PE
ip dhcp snooping database
flash
Writes all dynamically learned snooping entries to
flash memory
PE
show ip dhcp snooping Shows the DHCP snooping configuration settings PE
show ip dhcp snooping
binding
Shows the DHCP snooping binding table entries PE