Edge-Core ECS4810-12M Layer 2, Management Manual, Page: 636 / 1236

C
HAPTER
21
| System Management Commands
Event Logging
– 636 –
R
ELATED
C
OMMANDS
logging history (634)
logging trap (636)
clear log (636)
logging trap
This command enables the logging of system messages to a remote server,
or limits the syslog messages saved to a remote server based on severity.
Use this command without a specified level to enable remote logging. Use
the no form to disable remote logging.
S
YNTAX
logging trap [ level level ]
no logging trap [ level ]
level - One of the syslog severity levels listed in the table on
page 634 . Messages sent include the selected level through level 0.
D
EFAULT
S
ETTING
Disabled
Level 7
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
Using this command with a specified level enables remote logging and
sets the minimum severity level to be saved.
◆
Using this command without a specified level also enables remote
logging, but restores the minimum severity level to the default.
E
XAMPLE
Console(config)#logging trap 4
Console(config)#
clear log
This command clears messages from the log buffer.
S
YNTAX
clear log [ flash | ram ]
flash - Event history stored in flash memory (i.e., permanent
memory).
ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
D
EFAULT
S
ETTING
Flash and RAM