Edge-Core ECS4810-12M Layer 2, Management Manual

Page: 1039 / 1236

C
HAPTER
39
| Multicast Filtering Commands
Multicast VLAN Registration
– 1039 –
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
The following an MVR group address profile to domain 1:
Console(config)#mvr domain 1 associated-profile rd
Console(config)#
R
ELATED
C
OMMANDS
mvr profile (1042)
mvr domain
This command enables Multicast VLAN Registration (MVR) for a specific
domain. Use the no form of this command to disable MVR for a domain.
S
YNTAX
[ no ] mvr domain domain-id
domain-id - An independent multicast domain. (Range: 1-5)
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Only IGMP version 2 or 3 hosts can issue multicast join or leave messages.
If MVR must be configured for an IGMP version 1 host, the multicast
groups must be statically assigned using the mvr vlan group command.
E
XAMPLE
The following example enables MVR for domain 1:
Console(config)#mvr domain 1
Console(config)#
mvr priority
This command assigns a priority to all multicast traffic in the MVR VLAN.
Use the no form of this command to restore the default setting.
S
YNTAX
mvr priority priority
no mvr priority
priority - The CoS priority assigned to all multicast traffic forwarded
into the MVR VLAN. (Range: 0-6, where 6 is the highest priority)