Edge-Core ECS4810-12M Layer 2, Management Manual

Page: 940 / 1236

C
HAPTER
36
| VLAN Commands
Configuring VLAN Interfaces
– 940 –
E
XAMPLE
The following example shows how to set the interface configuration mode
to VLAN 1, and then assign an IP address to the VLAN:
Console(config)#interface vlan 1
Console(config-if)#ip address 192.168.1.254 255.255.255.0
Console(config-if)#
R
ELATED
C
OMMANDS
shutdown (824)
interface (818)
vlan (938)
switchport
acceptable-frame-
types
This command configures the acceptable frame types for a port. Use the
no form to restore the default.
S
YNTAX
switchport acceptable-frame-types { all | tagged }
no switchport acceptable-frame-types
all - The port accepts all frames, tagged or untagged.
tagged - The port only receives tagged frames.
D
EFAULT
S
ETTING
All frame types
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
When set to receive all frame types, any received frames that are untagged
are assigned to the default VLAN.
E
XAMPLE
The following example shows how to restrict the traffic received on port 1
to tagged frames:
Console(config)#interface ethernet 1/1
Console(config-if)#switchport acceptable-frame-types tagged
Console(config-if)#
R
ELATED
C
OMMANDS
switchport mode (942)