Edge-Core ECS4610-24F, Management Manual

Page: 577 / 1154

C
HAPTER
22
| Using the Command Line Interface
CLI Command Groups
– 577 –
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
DC (DHCP Server Configuration)
GC (Global Configuration)
IC (Interface Configuration)
IPC (IGMP Profile Configuration)
LC (Line Configuration)
MST (Multiple Spanning Tree)
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
RC (Router Configuration)
VC (VLAN Database Configuration)
Multicast Filtering Configures IGMP multicast filtering, query, profile, and
proxy parameters; specifies ports attached to a
multicast router; also configures multicast VLAN
registration
903
Link Layer Discovery
Protocol Configures LLDP settings to enable information
discovery about neighbor devices
951
Domain Name Service Configures DNS services. 969
Dynamic Host
Configuration Protocol
Configures DHCP client, relay and server functions 979
Router Redundancy Configures router redundancy to create primary and
backup routers
995
IP Interface Configures IP address for the switch interfaces; also
configures ARP parameters and static entries
1005
IP Routing Configures static and dynamic unicast routing 1019
Multicast Routing Configures multicast routing protocols PIM-DM and
PIM-SM
1085
Table 30: Command Group Index (Continued)
Command Group Description Page