Edge-Core ECS4610-24F, Management Manual, Page: 479 / 1154

C
HAPTER
19
| IP Services
Forwarding UDP Service Requests
– 479 –
Figure 303: Enabling the UDP Helper
S
PECIFYING
UDP
D
ESTINATION
P
ORTS
Use the IP Service > UDP Helper > Forwarding page to specify the UDP
destination ports for which broadcast traffic will be forwarded when the
UDP helper is enabled.
CLI R
EFERENCES
◆ "ip forward-protocol udp" on page 1015
C
OMMAND
U
SAGE
◆
Up to 100 UDP ports can be specified with this command for forwarding
to one or more remote servers.
P
ARAMETERS
These parameters are displayed in the web interface:
◆
Destination UDP Port – UDP application port for which UDP service
requests are forwarded. (Range: 1-65535)
The following UDP ports are inlcuded in the forwarding list when the
UDP helper is enabled, and a remote server address is configured:
BOOTP client
port 67
BOOTP server port 68
Domain Name Service port 53
IEN-116 Name Service port 42
NetBIOS Datagram Server port 138
NetBIOS Name Server port 137
NTP port 37
TACACS service port 49
TFTP port 69
W
EB
I
NTERFACE
To specify UDP destination ports for forwarding:
1.
Click IP Service, UDP Helper, Forwarding.
2.
Select Add from the Action list.
3.
Enter a destination UDP port number for which service requests are to
be forwarded to a remote application server.
4.
Click Apply.