Edge-Core ECS4610-24F, Management Manual

Page: 774 / 1154

C
HAPTER
30
| Interface Commands
– 774 –
media-type
This command forces the port type selected for combination ports 25-26.
Use the no form to restore the default mode.
S
YNTAX
media-type mode
no media-type
mode
copper-forced - Always uses the built-in RJ-45 port.
sfp-forced - Always uses the SFP port (even if module not
installed).
sfp-preferred-auto - Uses SFP port if both combination types
are functioning and the SFP port has a valid link.
D
EFAULT
S
ETTING
sfp-preferred-auto
C
OMMAND
M
ODE
Interface Configuration (Ethernet - Ports 1-2)
E
XAMPLE
This forces the switch to use the built-in RJ-45 port for the combination
port 25.
Console(config)#interface ethernet 1/25
Console(config-if)#media-type copper-forced
Console(config-if)#
negotiation
This command enables auto-negotiation for a given interface. Use the no
form to disable auto-negotiation.
S
YNTAX
[ no ] negotiation
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
◆
1000BASE-T does not support forced mode. Auto-negotiation should
always be used to establish a connection over any 1000BASE-T port or
trunk.
◆
When auto-negotiation is enabled the switch will negotiate the best
settings for a link based on the capabilities command. When auto-