Edge-Core ECS4610-24F, Management Manual, Page: 1030 / 1154

C
HAPTER
45
| IP Routing Commands
Routing Information Protocol (RIP)
– 1030 –
C
OMMAND
U
SAGE
RIP only sends and receives updates on interfaces specified by this
command. If a network is not specified, the interfaces in that network will
not be advertised in any RIP updates.
E
XAMPLE
This example includes network interface 10.1.0.0 in the RIP routing
process.
Console(config-router)#network 10.1.0.0
Console(config-router)#
R
ELATED
C
OMMANDS
router rip (1025)
passive-interface
This command stops RIP from sending routing updates on the specified
interface. Use the no form to disable this feature.
S
YNTAX
[ no ] passive-interface vlan vlan-id
vlan-id - VLAN ID. (Range: 1-4093)
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Router Configuration
C
OMMAND
U
SAGE
◆
If this command is used to stop sending routing updates on an
interface, the attached subnet will still continue to be advertised to
other interfaces, and updates from other routers on that interface will
continue to be received and processed.
◆
Use this command in conjunction with the neighbor command to
control the routing updates sent to specific neighbors.
E
XAMPLE
Console(config-router)#passive-interface vlan1
Console(config-router)#
R
ELATED
C
OMMANDS
neighbor (1029)