Edge-Core ECS4610-24F, Management Manual, Page: 125 / 1154

– 125 –
5
I
NTERFACE
C
ONFIGURATION
This chapter describes the following topics:
◆
Port Configuration – Configures connection settings, including auto-
negotiation, or manual setting of speed, duplex mode, and flow control.
◆
Port Mirroring – Sets the source and target ports for mirroring on the
local switch.
◆
Displaying Statistics – Shows Interface, Etherlike, and RMON port
statistics in table or chart form.
◆
Trunk Configuration – Configures static or dynamic trunks.
◆
Traffic Segmentation – Configures the uplinks and down links to a
segmented group of ports.
◆
VLAN Trunking – Configures a tunnel across one or more intermediate
switches which pass traffic for VLAN groups to which they do not
belong.
P
ORT
C
ONFIGURATION
This section describes how to configure port connections, mirror traffic
from one port to another, and run cable diagnostics.
C
ONFIGURING BY
P
ORT
L
IST
Use the Interface > Port > General (Configure by Port List) page to enable/
disable an interface, set auto-negotiation and the interface capabilities to
advertise, or manually fix the speed, duplex mode, and flow control.
CLI R
EFERENCES
◆
"Interface Commands" on page 769
C
OMMAND
U
SAGE
◆
Auto-negotiation must be disabled before you can configure or force a
Gigabit Ethernet interface to use the Speed/Duplex mode or Flow
Control options.
◆
When using auto-negotiation, the optimal settings will be negotiated
between the link partners based on their advertised capabilities. To set
the speed, duplex mode, or flow control under auto-negotiation, the
required operation modes must be specified in the capabilities list for
an interface.