Versatrax 300™
Document: UMBH008532.docm
Revision: A07
Created by: KJB
Date: 26 Sep 2019
3047763-A07
Source Location: C:\ePDM\ISLEng\products\bh-vt300series4-trackchassis\manuals\UMBH008532.docm
Page 37 of 67
Versat
rax 30
0 User Ma
nu
al
For IB
A
5954
3. Attach the tracks to the far side plates using ¼-20 x 5/8-inch pan head screws. Ensure both track
connectors are fully secured.
4. Attach the free side plates using M6x16 socket cap screws.
5. Install the remaining ¼-20 x 5/8-inch track screws.
Details for installing the telemetry can are illustrated below.
6. Ensure the heat sinks are removed from the telemetry can. Remove the carrier plates
– not the
fins from the plates.
7. Cabling is routed underneath the telemetry can as seen in Figure 28. It is best to turn the vehicle
upside down to rout the cabling.
a. Remove the bottom plate (35).
b. Position the telemetry can on the top plate.
c. Plug in the cables and install dummy plugs on un-used connectors
d. Rout wires underneath the telemetry can as shown in Figure 2.
e. Install the bottom plate.
8. Heat transfer paste may be added between the telemetry can and the top plate.
FIGURE 28: TELEMETRY CAN CABLING
