Versatrax 300™
Document: UMBH008532.docm
Revision: A07
Created by: KJB
Date: 26 Sep 2019
3047763-A07
Source Location: C:\ePDM\ISLEng\products\bh-vt300series4-trackchassis\manuals\UMBH008532.docm
Page 62 of 67
Versat
rax 30
0 User Ma
nu
al
For IB
A
5954
Annex B
Date: ________________________
Location: _____________________
Operator: _____________________
Pre-Operation Check
1)
Check safety equipment set-up
– cones, traffic control & personal safety equipment as per
site regulations.
2)
Verify the vehicle is in the correct configuration for the job.
3)
Check launch equipment set-up
– crane, hoist, tether sheaves, etc.
4)
Check for vehicle mechanical damage. Visually inspect the vehicle and Minitracs™ to
ensure that the moving parts are free of debris and are functional. Check that the track belts
are free to rotate.
5)
Check wiring harness for good routing / damage / proper tie-downs and restraints.
6)
Check Kellems grip and tow cable attachment.
7)
Check for dummy plugs in unused whips and connectors.
8)
Check winch for obstructions and mechanical damage.
9)
Check winch power and operation.
10)
Check controller & power supply connections.
11)
Start Generator / Check for stable 25 Amp 120VAC power source
12)
Launch control interface.
