Versatrax 300™
Document: UMBH008532.docm
Revision: A07
Created by: KJB
Date: 26 Sep 2019
3047763-A07
Source Location: C:\ePDM\ISLEng\products\bh-vt300series4-trackchassis\manuals\UMBH008532.docm
Page 27 of 67
Versat
rax 30
0 User Ma
nu
al
For IB
A
5954
Track Extensions
– Chassis Mark Conversion Chart
Nominal Pipe Size
Chassis Mark
Camera Platform Mark
16 in
Does Not Fit
Does Not Fit
18 in
13 in (Not Recommended)
Not Centered (use Full Down)
20 in
15 in
14 in (Full Down)
24 in
19 in
18½ in
36 in
34 in
Full Up
48 in
47 in
Not Centered (use Full Up)
FIGURE 16: CAMERA RAISE CONFIGURATION INDICATOR
1. On the camera raise mechanism note the various hole positions for the locking screw. Remove
the locking screws on both sides and raise the camera to the nominal pipe size indicated on the
Camera Raise Indicator (Figure 17). Replace the locking screws.
2. The indicator sizes are suggested settings. Note that there are more possible positions than
those indicated. At any time, the settings may be varied to suit conditions.
Camera Raise
Indicator
Camera Raise
Locking Bolt
(one on each
side)
