Vital Signs Monitor User Manual User Interface
- 69 -
To rename the user configuration:
1.
Select
Menu > Default Setup > User Configure
.
2.
Select a configuration file needed to rename from the list and click on
Rename
.
3.
Enter a name for the configuration file and confirm it.
10.5 Default Configuration
To set default configuration, select
Menu > Default Setup
. On the
Default
menu, users can
choose a factory configuration (adult, pediatric or neonate) based on the patient category. Also,
users can choose a user configuration saved in the monitor if it is available. For more information
about user configuration, refer to
User Configuration
.
To check the configuration currently used, select
Menu
>
Default Setup
. The one labeled with
●
is current configuration. If there's no labeled configuration, it means the currently used
configuration is not one of them.
