Vital Signs Monitor User Manual Storing Data in the Storage Device
- 105 -
Chapter 16 Storing Data in the Storage Device
16.1 Setting Storage Mode (For Monitor Mode Only)
NOTE:
The storage time varies according to the patient's parameter data volume. When store
time for single patient data reaches 240 hours, the monitor will create a new folder for
continuous data store.
Refer to Section
Data management
for more information about data volume in each work mode.
When data reach the maximum, you can choose to
Keep storing
(default) or
Stop storing
by
selecting
Menu
>
System Setup
>
Storage
>
if storage space is full
.
If you choose
Keep storing
, as soon as the data is full, the earliest data will be replaced by the
latest one.
If you choose
Stop storing
, the monitor will stop data storing and the latest data cannot be stored
when the data reach the maximum.
16.2 Selecting a Storage Device
To configure the storage device, select
Menu
>
System Setup
>
Storage
>
Storage Device
, and
choose the storage medium from the pop-up list as desired.
In Ward round or spot-checking mode, Storage Device is fixed as
Internal Storage Device
.
NOTE:
In ward round or spot-checking mode, if storage space of the system is <200 M, a prompt
will be given out. In order to store data normally, please clean the space in time.
In monitor mode,
Internal Storage Device
(default)
and
Removable Device
can be selected. If
Removable Device
is selected, data storage can be operative after user inputs User Maintain
password.
When you choose
Internal Storage Device
as the storage medium, if configured, the storage
device name will automatically become
Internal Storage Device
. You can select a removable
device as a working one among the plugging devices by selecting
Menu
>
System Setup
>
Storage
>
Storage Device
and choosing the device name from the list.
After you configure the appropriate storage device, click exit. If the storage device is successfully
starting data storing, the monitor will be indicated by the symbol
. If there is no enough
space in storage device, or the storage device is read-only/damaged, the symbol
will be
displayed.
