40
4.4
Ultrasonic Flow Meter
The ultrasonic flow meter is a wonderful piece of test equipment, as long as you use it correctly and
maintain it. If can be used to measure the actual flow in piping systems to aid in balancing problems
when multiple towers are being treated by on treatment system.
Refer to your Operation Manual supplied with your meter for specifics on how to use your meter.
Safely Using the Ultrasonic Flow Meter-
Always clean and calibrate your meter before each use. Replace the transducer gel if the
gel is no longer clear.
Apply gel to the pipe being tested before you apply the sensor.
Apply the sensor onto the pipe in a manner that lines up the sensor as instructed in the
manual (the sensor must be lined up on the pipe according to the direction of the flow
within the pipe.)
Never place the sensor on a pipe directly after a turn in flow or restriction of any type, this
can cause turbulence in the water flow and may force your meter to measure an incorrect
flow value.
Always use the protective cap to cover the probe tip when not in use.
Refer to your meter’s manual for cleaning and calibration recommendations.
Always replace batteries and fuses with those specified by the manufacturer.
Summary of Contents for CHC Series
