EcoWater CHC Series, Service And Troubleshooting Manual, Page: 86 / 130

86
6.4 Separator Purge Timer
A1 15 Y1
18 16 A2
1
1
2
2
3
3
4
4
6
6
10-100h
10-100h
1-10h
1-10h
6-60min
6-60min
1-10min
1-10min
6-60
6-60
1-10
1-10
.1-1
.1-1
7
7
8
8
9
9
10
10
ON
Time
OFF
Time
A
B
C
D
E
Dial A adjusts the
range values of B
Dial C adjusts the
range values of D
If A is adjusted for 6-60 than the range for
B will be 6-60 seconds with 1 on B
representing 6 seconds and 10 representing
60 seconds. So if you want 18 seconds ON
you will need to adjust A to 6-60 and B
will need to be set on 3 (3 x 6 = 18)
If C is adjusted to 1-10h than the range for
D will be 1-10 hours with 1 on D
representing 1 hour and 10 representing 10
representing 10 hours. So if you want
3 hours OFF time, you will need to adjust
C to 1-10h and D to 3.
As long as you remember that the white
dial above the blue dial sets the range of the
blue dial, and you carefully set the white
dial you can adjust the timer’s ON and
OFF times
The rate of Flashing of the indicator E
represents the status of the timer. If E
flashes quickly than the timer is in the ON
state, while if it flashes slowly, it represents
the OFF state.
Whenever power is turned OFF and the
back ON the timer will initiate the ON
state for the period selected by the ON
Time dials. Once that period is complete
it will start the OFF stat e time as selected
by the OFF Time Dials.
Adjusting the Separator Purge Timer