9
Maintenance
Personnel:
n
Specialist
n
Qualified electrician
n
Mechanic
n
Service personnel
Read the User Manual for the EMP II E60 diaphragm metering pump,
Chapter 3 ‘Scope of supply’ on page 20.
NOTICE!
Damage caused by using incorrect tools!
Damage may occur as a result of using incorrect tools during assembly,
maintenance or troubleshooting.
Only use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
– All installation, maintenance and repair work may only be performed by
authorised and trained experts in accordance with valid local
regulations.
– The safety regulations and the required protective clothing when
working with chemicals must be complied with. Attention must be paid
to the information included on the product data sheet for the metering
medium used.
– The metering medium supply must be isolated and the system cleaned
prior to installation, maintenance and repair work.
NOTICE!
Only OE spare parts may be used for maintenance work and repairs.
DANGER!
Personal protective equipment, hereinafter referred to as PPE, is used to
protect personnel. It is imperative to pay attention to the PPE described in
the product data sheet for the metered medium.
DANGER!
Repairs on electrical equipment may only be carried out by trained
electricians (Employers' Liability Association safety rules VB G 4 and ZH
1/11).
Before any adjustment, maintenance work, repair work or exchange of
parts, disconnect from the mains or isolate the pump from all sources of
power if it is necessary to often the device.
Secure it to ensure that it cannot be switched back on inadvertently.
Maintenance
43
417101964 Rev. 4-04.2019
Summary of Contents for 141277
Page 2: ......
Page 137: ...67 417101964 Rev 4 04 2019...
