ecoSMART Supervisor user, installer and technical service manual
27
EN
BRINE CONFIGURATION.
Allows the type of brine system to be selected from among GEOTHERMAL COLLECTOR / AIR UNIT
/ HYBRID SYSTEM.
MENU 2.2.2 Services
SERVICES.
Allows ENABLED / DISABLED the services activated by the heat pump to in the supervisor.
PRIORITIES CONFIGURATION.
Allows the response to the different services to be prioritised.
MENU 2.2.3. Remote control
EVU CONFIGURATION.
Allows ENABLED/DISABLED the EVU function. The heat pump is on, but the compressor is disabled
by the EVU signal. Secondary functions can be activated such as start of drive groups, DHW recirculation, etc.
REMOTE CONFIGURATION HP.
Allows the remote control of supervisor to be ENABLED / DISABLED and the operating logic
to be selected.
REMOTE CONFIGURATION WINTER / SUMMER.
Allows the remote control of WINTER / SUMMER program to be ENABLED
/ DISABLED and the operating logic to be selected.
REMOTE BUS CONTROL.
It allows to ENABLE / DISABLE the BUS remote control function to manage the ACTIVATION /
DEACTIVATION and the setpoints of each shunt groups in heating and cooling, and the services DHW and POOL. Also it
allows to control the BUS remote control ON / OFF and WINTER / SUMMER. BUS communication makes use of BMS and
BMS2 ports.
CONFIGURACIÓN BMS.
Allows the communications parameters in BMS2 port to be changed in .The
configuration to READ / WRITE data in this port need to be the factory default parameters which are showed in the Figure
5.3.
Figure 5.3.
Factory default settings of BMS port for Reading data from heat pump.
CONFIGURACIÓN BMS2.
Allows the communications parameters in BMS2 port to be changed in . The
configuration to READ / WRITE data in this port need to be the factory default parameters which are showed in the Figure
5.4.
Figure 5.4.
Factory default settings of BMS2 port for Reading data from heat pump.
MENU 2.2.4. Protections
PUMS LIMITATION.
Allows adjusted the minimum and maximum regulation of pumps connected to supervisor. You could
check flow drop in exchangers for each model.
PUMPS DT DEFINITION.
It allows select brine and production DT’s, who must be adjusted with brine and production
pumps.
