ecoSMART Supervisor user, installer and technical service manual
23
EN
5.7.
User menu
In Table 5.1 the sub-menu structure of menu 1. USER is shown.
1. USER menu
Sub-menu level 1
Sub-menu level 2
Screen
1.1. On/Off
On/Off
AUTO settings
pLAN address
Heat pumps state
ecoGEO group On/Off
1.2. Schedule
1.2.1. Date/Time
Date/Time
Clock
1.2.2. Holidays
Holidays
1.3. Heating
Heating buffer
Heatingsetpoint
1.4. Cooling
Cooling buffer
Cooling setpoint
1.5. DHW
DHW storage tank
1.6. Pool
Pool settings
1.7. Information
Brine/Production
Cogeneration
Outside temperature
ON/OFF ecoGEO group
HP availability
Compressors
Energy meter
Month energy meter
Month / Annual energy meter
Version
1.8. Alarms
Active alarms
Reset alarms
Table 5.1.
USER menu structure.
The functions included in each menu are described below.
MENU 1.1. ON/OFF
ON/OFF.
Allows the heat pump to be switched between ON / OFF / REMOTE. The selected state can be modified via the
programming of the schedule or alarm. Also allows the operating program to be selected between WINTER / SUMMER / AUTO
/ REMOTE. In both cases the REMOTE option is only available if the installer has been previously enabled in menu 2. INSTALLER
/ REMOTE CONTROL. If the REMOTE option has been selected, the heat pump responds to the control signals from an external
device in the corresponding terminals.
AUTO SETTINGS.
Allows modified Winter / Summer change temperature and the time of change. If select winter temperature
up summer temperature, the machine make the mix program in intermediate temperatures.
PLAN ADDRESS.
Shows control units connected by pLAN and the control panels connected to each control unit. Also shows the
unit control and the control panel address of this it control.
HEAT PUMPS STATE.
Allows shows the state of each heat pump connected by pLAN. In the
