58
8. ‘FS20 TS’ telephone remote control
Ö
The ‘FS20 TS’ telephone remote control is available separately; it is not supplied with the saver set or the
FHZ1000.
Please read the user manual of the ‘FS20 TS’ for information on installation, operation and programming.
Important for operation is that all the devices of the FS20 wireless control system (which includes the FHZ1000) are set to
the same 8-digit house code (for instance, ‘12341234’).
When batteries are inserted into the ‘FS20 TS’ telephone remote control a random house code is assigned to it; this must
be changed to the FHZ1000 ‘s house code. To do this, proceed as described in the user manual of the ‘FS20 TS’.
Ö
Please note:
In order to activate a macro, the programming of the ‘FS20 TS’ must be completely finished.
To activate a macro, proceed as follows:
• Call the ‘FS20 TS’.
• The ‘FS20 TS’ answers after the programmed number of call signs and confirms with a short, high-pitched tone.
• Confirm this by pressing the asterisk button (*) on the telephone.
• A short tone is given as confirmation.
• Now enter the programmed PIN.
• Press the asterisk button (*).
If the code has been entered correctly, a short tone can be heard again as confirmation.
If no PIN has been programmed, then this stage is skipped.
• Now enter the number of the macro to be activated (1 to 4).
• Confirm the entry by pressing the asterisk button (*).
• Disconnect the telephone connection by hanging up.
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
