27
The following operating steps must now be carried out on the FHZ1000:
• Briefly press the ‘
x
’ button once.
• Use the scroller to select the remote switch (or remote dimmer) to be programmed.
• Briefly press the ‘
x
’ button once.
To induce a change of switching status (only then will a radio signal be sent), briefly press the ‘
’ button once,
or change the status by turning the scroller.
• To execute the switching operation, briefly press the ‘MAKRO’ button once.
The display briefly shows ‘gespeich.’ (saved).
• The remote switch (or remote dimmer) receives this radio signal and automatically exits the programming mode (LED
on the remote switch stops blinking).
This completes the programming.
• Press the ‘
w
’ button twice in order to return to normal operating mode again.
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
