50
• Use the scroller to select the desired priority for the reception failure.
• Briefly press the ‘MAKRO/OK’ button once.
• The following information is displayed:
Figure 36
• Use the scroller to select the desired priority for the low battery alarm.
• Briefly press the ‘MAKRO/OK’ button once.
• The following information is displayed:
Figure 37
• Now you can set the priority for the external alarm. You should leave this as the default setting; the external alarm
has no function!
• Briefly press the ‘MAKRO’ button once.
• The display briefly shows ‘gespeich.’ (saved).
• Pressing the ‘
w
’ button 3 times returns you to the normal operating mode.
X
X
X
X
X
2. Alarm confirmation (alarm dialler, = HMS/FHZ radio telephone dialler)
Proceed as follows to confirm an alarm:
• Briefly press the ‘
x
’ button once.
• Select ‘Sonderfkt.’ (special function) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Alarme’ (alarms) using the scroller.
• Briefly press the ‘
x
’ button once.
A list of the available alarms appears.
If no alarm is active, the display shows ‘Alles OK’ (everything OK).
By turning the scroller, you can ‘browse’ this list. The room name and alarm trigger appear alternately in the lower line
of the display. In the following example the room controller’s battery in the toilet is empty. The following appears on the
display (alternating):
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
