59
9.
‘
HMS/FHZ
’
radio telephone dialler (alarm dialler)
Ö
The ‘HMS/FHZ’ radio telephone dialler (also known as the alarm dialler) is not supplied with the economy set
or the FHZ1000 but is available separately. When assembling, operating and programming the device please
pay attention to the user manual of the ‘HMS/FHZ’.
In the following, we would like to give you additional operating information that you require when operating the FHZ1000.
The radio telephone dialler must first register with the FHZ1000 after its batteries have been inserted for the first time (or
when using an external power supply).
Ö
It is imperative that the casing of the ‘HMS/FHZ’ is left open, as this is the only way that the device can be
registered with the FHZ1000!
a) Registering the alarm dialler with the FHZ1000
To register the alarm dialler with the FHZ1000, proceed as follows:
• Briefly press the ‘
x
’ button once.
• Select ‘Sonderfkt.’ (special function) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Alarmw.’ (alarm dialler) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Installat.’ (installation) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Anmelden’ (register) using the scroller.
• Briefly press the ‘MAKRO’ button once.
• The display shows ‘warten’ (wait) while it communicates with the alarm dialler by radio. The alarm dialler’s LED briefly
lights up at the same time.
• ‘angemeldet’ (registered) appears on the control centre’s display after the registration is successfully completed.
• Pressing the ‘
w
’ button 3 times returns you to the normal operating mode of the FHZ1000.
• Now close the alarm dialler’s cover, which must audibly click in.
Ö
Carry out the settings for the alarm dialler according to the instructions in the following section.
X
X
X
X
X
1. Alarm dialler settings
The following settings need to be made in order to use the alarm dialler:
• Enter telephone number 1
• Enter telephone number 2
• Enter telephone number 3
• Enter dialout number
• Enter the alarm dialler’s PIN, for remote control over a telephone
• Allow remote control (yes/no), number of call signs before automatic call acceptance.
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
