ECKELMANN Virtus 5 Series, Operating Instructions Manual

Page: 119 / 183

Firmware V7.16.x 16.05.2023 119/183
•
•
•
•
•
8 Menu 2-8 - Special Inputs
The digital special inputs of the system centre are called up using this button. All important
parameters and the status of the inputs are displayed there.
following special inputs are available:
shunt lock
emergency power supply
sprinkler alarm
store lighting
setpoint toggle
The screen contains the following parameters:
Special inputs
Shunt lock Predefined designation of the special input (digital input)
Priority XX Priority of the signal / alarm input
Delay time [sec.] XX Delay time of the signal / alarm in seconds
Quiescent current (low-active) X Alarm is signalled if
- quiescent current = Yes: (signal voltage not present low-active)
- quiescent current = No: (signal voltage is present high-active)
Input X
Connection of the input
1)
Status XX Current status of the input: OK = light grey, no signalling Waiting = yellow:
signalling, delay time running, Message = green: no alarm Alarm = red: signalling,
alarm / message has been tripped
1)
Designations of the supported modules / inputs:
CI 4x00 system centre, internal inputs IN1 / IN2 (terminals A1, A2 / B1, B2)
SIOX1 1. extension module, inputs 1 .. 12
SIOX2 2. extension module, inputs 1 .. 12
SIOX3 3. extension module, inputs 1 .. 12
SIOX4 4. extension module, inputs 1 .. 12
DDC1 1. GLT DDC module 1
DDC2 2. GLT DDC module 2
DDC3 3. GLT DDC module 3
DDC4 4. GLT DDC module 4
Note: GLT = building control and DDC = Digital Direct Control
As the display for all special inputs is identical, the explanations are provided using the example of the
“shunt lock”.

The digital special inputs are configured using Menu 4-1-3. Detailed description of the functions can be
found in chapters
Digitale Eingänge .
