KGL Operating Manual – UA 412 S
2019-01-14
/
79 122
8.3.1 Menus and operating screens
If the system centre, store computer or operator terminal remain locked down, settings on the
controller are read-only. Changes and inputs are not possible. However, if any parametrisation is
required, the lock-down for the input must be removed first, see
.
Cancelling entry block, page 83
Numbering of menus and screens
Every menu in the menu tree can be reached using a specific number and every operating screen in a menu
can be reached using a specific selection in the menu. This is identified in the operating manual by a unique
identifier of digits (and letters if necessary) in the menu tree (e.g. Menu 3-1-2-a). Thereby, the numerals 1, 2, ..
stand for the identification of the corresponding menu, and the letters a, b, .. stand for the sequence of the
corresponding operating screens in the menu.
Example for the numbering of a menu / screen
Any reference to, for example
in the operating manual means that the required menu of the E*LDS
Menu 3-1-2
component is called by entering the digits or selection of
via the remote control in the system centre,
"3 - 1 - 2"
store computer, operator terminal or terminal device. The menu item "Remote control" is the interface for the
E*LDS controller; for details, see
.
Calling controller menu using remote control, page 82
If any letter is appended (e.g.
), this means that another submenu (operating screen or selection
Menu 3-1-2-a
list) can be reached in this menu using the cursor right button (
). The letters indicate their sequence in the
screen.
If any menu or operating screen consists of more lines than are possible in the display, scrolling is possible
using the cursor buttons (
) and (
).
