KGL Operating Manual – UA 412 S
2019-01-14
/
62 122
A notification is displayed in the status field if the controller has been found. Then select the current firmware
file ("
") from the directory into which the ZIP file was extracted (see arrow).
xxx.bin
After the conversion, tap the button "Update firmware" to start the firmware upload:
The program can be ended after the successful firmware update by closing the window.
The USB A-B cable can now be disconnected from the controller.
Step 4: DIP switch S3 in original position again
After the firmware update has been performed, all coding switches 1..8 of the DIP switch S3 must be returned
to their
.
original position
The settings depend on the controller type!
Risk of controller failure! The controller only accepts the settings for DIP switch S3
the controller
after
has been briefly disconnected from the power supply!
After the firmware update, the saved settings can be reloaded into the case controller from LDSWin
as required..
