KGL Operating Manual – UA 412 S
2019-01-14
/
76 122
8 Operation UA 412 S
8.1 Operation possibilities
The controller provides menus and screens for the display and adjustment of values. However, no operation
for this is provided on the controller itself. The actual operation of these menus is performed externally using
the following possibilities:
Local operation with a BT 300 x operator interface: The operation is performed directly on-site at the
controller with an operator interface of the BT 300 series.
For details about operation, see
.
Local operation using a BT 300 x operator interface, page 76
Remote control via the terminal: The controller can be operated remotely (e.g. from the machine room)
using the system centre, a store computer or an operator terminal. The communication with the
controller is performed via the CAN bus:
For details about the operation, see
.
Remote control using the terminal, page 78
Remote control with PC software LDSWin: A PC with LDSWin installed is connected to the system
centre or the store computer. The connection can be made here, for example, via the serial or USB
port, a modem, a network or the PC-CAN bus adapter. In this way, the controller can be operated very
conveniently with the PC software and its powerful functions such as controller analysis, evaluations,
storing parameter sets, creating lists, etc.
See the LDSWin operating manual for details about the range of functions.
8.2 Local operation with a BT 300 x operator interface:
