Firmware V3.00
05.08.2019
71/100
8 Operation of UA 410 L
8.1 Operation possibilities
The controller provides menus and screens for the display and adjustment of values. However, no operation
for this is provided on the controller itself. The actual operation of these menus is performed externally using
the following possibilities:
•
Local operation with a BT 300 x operator interface:
The operation is performed directly on-site at the
controller with an operator interface of the BT 300 series.
Local operation with a BT 300 x operator interface
for details for the operation.
•
Remote control via the terminal:
The controller can be operated remotely (e.g. from the machine room)
using the system centre, a store computer or an operator terminal. The communication with the controller is
performed via the CAN bus
