Page 79
Watching One Program While Recording Another
4. Select the timer or timers you want to delete.
Note
:
Select All
if you want to delete all of your timers.
5. Select
Delete
. The timer(s) are deleted.
Watching One Program While Recording Another
Single Mode
While in
Single Mode
, you can set up the satellite receiver to record programs
while you’re also watching one you’ve already recorded.
1. Press the front panel
MODE
button to make sure the receiver is in
Single
Mode
. The front panel of the receiver has an indicator that is marked
Single
.
Note
: If someone is using the TV2 outputs, you will see the following
popup on the nearby TV warning you that you are about to disrupt the use of
the TV2 outputs:
2. Press
GUIDE
to open the
Program Guide
. Find a program you
want to watch now.
3. Press
SELECT
to watch that program.
4. Press the
RECORD
button. A message will display asking
whether you want to record the remainder of the program. Select
OK
to begin recording now.
Tip: You can use
the Front Panel
Locks to prevent
the Mode from
being changed
accidentally. See
page 97 for
instructions.
