Page 107
Control Other Devices with the Remote Controls
Use the remote control’s mode buttons,
SAT
(satellite receiver),
TV (
for a TV
)
,
VCR
(for a VCR or a DVD player), and
AUX
(“auxiliary,” for a second TV, a
second VCR, a DVD, a tuner, or an audio amplifier) to set the remote to the
right mode for the device. To change the mode, press the button for the device
you want the remote to control. The mode button lights for two seconds to show
you’ve set the remote to that mode.
Limited Mode
You can program your remote control in limited mode to keep from accidentally
changing the channel on your TV or VCR. When you use the remote to control
your TV in limited mode, you will only be able to use the
POWER
,
MUTE
, and
VOLUME
buttons. Also, when you use the remote to control your VCR in
limited mode, you will only be able to use the power and
VCR
function buttons.
The section
Setting Up the Remote to Control
Other Devices
has a step that tells
the remote control to go into limited mode.
Set Up the Remotes to Control Other Devices
Over the next few pages we tell you how to use the remote to control a TV, a
VCR, a DVD player, a tuner, or an amplifier.
To use the remote to control other devices, you must first program it to control
these other devices. You can do this by either following the instructions in
Set
Up the Remote Control
below, or the
Scan for Device Codes
procedure
described on page 109.
If you are programming the remote to control a combination device, such as a
TV/VCR or a VCR/DVD, program the remote control in one mode, and then
repeat the procedure in the other mode. For example, to program the remote to
control a TV/VCR using code 748: Follow the instructions to program the
remote to control the TV using code 748, and then repeat the instructions for the
VCR using the same code.
Set Up the Remote Control
Instructions
Additional Information
1. Turn the device on.
Use the device’s front panel buttons
or its remote control.
2. Find the brand name of the
device in the tables starting on
page 147.
If the brand isn’t listed, see
Scan for
Device Codes
on page 109.
3. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button.
The mode button flashes.
For example, hold the
TV
mode
button for a TV until all of the other
mode buttons light. When you let
go, the
TV
mode light will flash.
