EC POWER XRGI 6, Maintenance Instruction, Page: 41 / 50

MAINTENANCE
STEP 9 – EXHAUST GAS COMPENSATOR & HOSE CLAMPS

Loosen the 2 hose clamps on the exhaust gas compensator by a hose clamp
pliers and put them aside.

Remove the exhaust gas compensator together with the 2 hose clamps from
both ends of the pipe.

Replace the exhaust gas compensator including the 2 hose clamps and fix
the exhaust gas compensator with the 2 hose clamps by a hose clamp pliers.
STEP 10 – LAMBDA SENSOR

Separate the lambda sensor cable from the cable tree at the plug-in contact.

Unscrew the old lambda sensor from its socket by a lambda sensor top long
and screw in the new lambda sensor.

Reconnect the Lambda sensor cable to the cable tree.
Fig. 7.26
Fig. 7.27
Fig. 7.28 Fig. 7.29
40