EC POWER XRGI 6, Maintenance Instruction

Page: 30 / 50

MAINTENANCE
Only perform maintenance work on the XRGI ® system when it is not in
operation and is fully cooled down! Otherwise, there is a risk of burns from
hot components and/or scalding if substances should escape.
REQUIRED MATERIAL
EC POWER service kit for XRGI ® 15 (Item No.: 01KIT2503) consisting of:

1 pc. air filter

3 pcs. engine oil

1 pc. plug for measuring point

4 pcs. spark plugs

1 pc. oil filter
REQUIRED TOOLS

Oil suction pump

Torque wrench

Oil filter spanner

17 mm socket insert

Water pump pliers

20.8 mm spark plug wrench

Funnel

3 mm Allen screwdriver

feeler gauge

5 mm Allen screwdriver

FS2009USB programming device

17 mm open-ended spanner

Flue gas analyser
Before commencing maintenance work, shut down the XRGI ® system at
the user level on the iQ-Control Panel and at the main switch. Close the
gas valve and unplug the Q-Heat Distributor.
6. MAINTENANCE XRGI® 15
Fig. 6.01
29