MAINTENANCE
7.2.
SOFTWARE UPDATE
If your XRGI
®
system already has the latest software installed, please
proceed to section
7.3.
REGULATION OF EMISSIONS
.
STEP 1 – SYSTEM DATA
Once the software has been updated, all settings and operational parame-
ters are set to factory settings.
Software-Release 1.9.17 (or higher)
: after the software update, all
system data must be entered manually.
Software-Release 1.14.6 (or higher)
: after the software update, recover
all system data with the
configuration request
function.
Before updating the software, note all current settings and operational parame-
ters of the XRGI
®
system. Please refer to the main menu under
Info
and in the
technician menu under
Settings
.
Press any key on the user interface to activate the display and enter the
menu.
Move the cursor to
Info
by using the
▲▼
buttons and press
OK
on the user
interface.
Press
ESC
on the user interface to return to the menu.
Move the cursor to
Technician
by using the
▲▼
buttons and press
OK
on
the user interface.
Log on.
In the technician menu, move the cursor to
Setup
by using the
▲▼
buttons
and press
OK
on the user interface.
STEP 2 – DATA TRANSMISSION
Ensure that the latest data from the XRGI
®
system are send to the EC POWER
service database by making a manual modem call before the software update.
In the main menu, move the cursor to Modem call by using the
▲▼
buttons
and press
OK
on the user interface.
Fig. 7.30
Fig. 7.31
Fig. 7.32
Fig. 7.33
Fig. 7.34
Fig. 7.35
Fig. 7.36
41
