MAINTENANCE INSTRUCTION
Improper service and maintenance work can affect the system function and cause damage! Installing non-approved components, as well
as unauthorized modifications and conversions, may affect safety and reduce warranty.
Only permit authorised EC POWER personnel to perform service and maintenance work.
Service and maintenance intervals must be observed.
Only original spare parts and approved equipment (such as engine oil and coolant) may be used.
The following work must be carried out with every maintenance:
Visual check
Scheduled maintenance
Preventive maintenance of the wear parts
In addition, it must be confirmed in the service booklet, whether the service work
and the component replacement has been completed.
Information on the service booklet:
Acknowledge the completed service work/inspection with a check mark.
Acknowledge the service work/inspection not completed with a minus mark.
Send a manual call to the EC POWER service database before and after
every maintenance.
Acknowledge every maintenance with a signature.
Maintenance is required after fixed intervals, to ensure that the XRGI
®
system always operates safely and reliably.
The maintenance interval display on the iQ-Control Panel display as well as in the EC POWER service database also indicates this date.
MAINTENANCE INTERVAL
(Maintenance is performed after the following operating hours or no later than after 2 years):
XRGI
®
-TYPE / MAINTENANCE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
XRGI
®
6
10.000
20.000
30.000
40.000
50.000
60.000
70.000
80.000
90.000
100.000
XRGI
®
9
10.000
20.000
30.000
40.000
50.000
60.000
70.000
80.000
90.000
100.000
XRGI
®
15
8.500
17.000
25.500
34.000
42.500
51.000
59.500
68.000
76.500
85.000
XRGI
®
20
6.000
12.000
18.000
24.000
30.000
36.000
42.000
48.000
54.000
60.000
Any guarantee/warranty claims will be invalidated if maintenance is performed later than 200 operating hours after the recommended
maintenance interval.
Only use approved EC POWER spare parts and components. All guarantees and/or warranties provided will be invalidated if other com-
ponents and materials are used.
The following chapters describe the maintenance work. Follow the maintenance instructions step by step!
2.
MAINTENANCE INSTRUCTION
Fig. 2.01
5
