WX2NB Manual v.1.0
Page 36 / 40
a)
With the use of OSM-Server console position cursor on proper device in
“Devices” tab.
b)
Click “Config.” option and then select “Set Configuration” function to display lit of
parameters.
c)
Enter server address, server port and APN. Click OK and system shall send to
device provided parameters.
d)
Wait till device addresses server (in “Devices” tab it will be marked with green
colour).
e)
Launch software and define options of device (description is provided in chapter
7 of this Manual).
f)
Select “Send” to display a new window and select remote connection (GPRS tab).
Save settings in memory of device. Saving course is displayed on special
window.
g)
After saving completion close configuration wizard.
h)
The device is ready to transmit data.
7.2.2.
Reprogramming of device
As the device has defined access parameters in respect of Wi-Fi network and OSM-
Server, it is possible to program device at any time.
If device is installed in secured object and connected to power supply follow the
procedure:
a)
Launch configuration wizard and define options of device (description is provided
in chapter 6 of this Manual).
b)
Select “Send” to display a new window and select remote connection (GPRS tab).
Save settings in memory of device. Saving course is displayed in special window.
c)
After saving completion close configuration wizard
d)
The device is ready to transmit data according to new settings.