WX2NB Manual v.1.0
Page 22 / 40
6.3.1.2.
Sensitivity [ms]
This parameter means minimum time for change maintenance at input so that it
would be detected by transmitter. Factory setting is 400ms.
6.3.1.3.
Lock
With this option you can lock any input of module, and as a result condition changes
on this input will be ignored and will not be reported to monitoring station. Lock
may be persistent or temporary.
In case of temporary lock – user can set lock time and number of input state
changes after which lock occurs. Lock time is counted from first input state change.
Both types of lock can be deactivated by command (see RLIMIT command).